SyncTimer

How to share a countdown timer and control it from another device

Keep the control console on the operator’s laptop and open the read-only screen on the speaker’s display. Each device needs a browser and an internet connection for setup.

Connect the display

Create a room from the home page. In Connect a screen, copy the screen link into the display’s browser or scan the QR code on that device. Keep the control link with the operator.

Using one laptop and a projector?

Connect the projector as an extended display. Open the screen link in a separate browser window and move that window onto the projector. Select fullscreen on the timer display if the browser supports it. Your laptop can now show the console while the room sees the countdown.

Confirm the correct screen

Wait for the console to show a connected screen. Select Send test flash and watch the physical display. Choose I saw the flash once it lights up. If another screen flashes, check the room link on the intended device.

Rehearse a countdown

In Preparation, select a short countdown and start it. Check the display from the speaker’s position, pause and reset the rehearsal cue. An open screen can continue a running countdown during a disconnect. Reconnect before sending new cues.